SPARTS Titanium Bolt Kit for BMW R 1250GS ADV – CNC Titanium Upgrade K

Hoppa till produktinformation

SPARTS Titanium Bolt Kit for BMW R 1250GS ADV – CNC Titanium Upgrade Kit

$1,889.30

Fraktkostnad beräknas i kassan.

ColorGold

Specification R1250GS ADV current screw data for all available positions 308 pcs New exhaust tail hanger washer screw kit 1 set Modified T-brand windshield 8 pcs Modified TANAX AOS4 / AOS3 mirrors 12 pcs Handlebar top clamp (OEM) 4 pcs Front brake master cylinder mounting screws 2 pcs Front brake reservoir cap screw 1 pc Clutch master cylinder mounting screws 2 pcs Clutch reservoir cap screw 1 pc Handlebar end weights 4 pcs Handguards 2 pcs Instrument cluster mounting screws 2 pcs Modified LR-brand headlight guard 18 pcs Front turn signals 2 pcs Lower front fork triple clamp 4 pcs Front fender 2 pcs Front axle clamp bolts 2 pcs Front caliper mounting bolts 8 pcs Front brake disc bolts 10 pcs Front ABS ring bolts 5 pcs Front ABS sensor 1 pc Upper fuel tank cover 2 pcs Fuel cap 6 pcs Front intake grille 2 pcs Modified W-brand radiator guard 8 pcs Fuel tank mounting bolts (under front seat) 2 pcs Front side body panels 6 pcs Lower side body panels 4 pcs Mid-frame trim panels 2 pcs Main and sub-frame connection 8 pcs Front footpeg pins 2 pcs Front footpeg guard (left side) 2 pcs Rear footpegs 4 pcs Rear footpeg pins 2 pcs Engine cover (left side driveshaft end) 3 pcs Modified T-brand clutch lever 4 pcs Kickstand kill switch 1 pc Rear swingarm upper linkage mount 2 pcs Rear brake master cylinder 2 pcs Rear caliper mount 2 pcs Exhaust hanger 1 pc Rear fender bracket mount 3 pcs Rear turn signals 2 pcs Rear wheel hub 5 pcs Windshield bracket mount (left side) 4 pcs Windshield bracket mount (right side) 4 pcs Modified T-brand rear windshield bracket mount 4 pcs Modified W-brand handlebar clamp 4 pcs Boxer engine front cover bolts 14 pcs Boxer engine camshaft cover bolts (left and right) 4 pcs Lower crash bar to engine mounts (left and right) 8 pcs Rear top case + pannier rack 8 pcs Lower rear pannier rack mount 4 pcs Starter motor ground bolt 1 pc BMW OEM crash bar bolts 18 pcs Rear brake hose guard 1 pc Under front seat mount 4 pcs Modified rear brake fluid reservoir guard 1 pc Modified W-brand skid plate 5 pcs Modified fog light switch mount (left clutch side) 1 pc Modified Akrapovič mid-pipe heat shield 5 pcs Modified Akrapovič tail section heat shield 2 pcs Modified GR auxiliary lights (upper section) 18 pcs Modified GR auxiliary lights (middle section) 12 pcs BMW OEM auxiliary lights 8 pcs Modified T-brand steering stopper 6 pcs Modified enlarged side stand foot mount 3 pcs Modified quick-release fuel tank cap 4 pcs

Denna artikel är ett återkommande inköp eller ett inköp med uppskjuten betalning. Genom att fortsätta godkänner jag avbeställningspolicyn. Jag godkänner också att ni debiterar min betalningsmetod vid de datum, med de priser och den frekvens som angivits på denna sida, tills min order är distribuerad eller tills jag avbryter, om detta tillåts.

SPARTS钛合金螺栓套件专为BMW R 1250GS ADV设计，是提升性能和外观的理想升级之选。这些螺栓采用优质S级TC4钛合金制成，具有卓越的强度、耐腐蚀和轻量化特性。精密的CNC加工确保其与您的BMW R 1250GS ADV的所有部件完美契合，同时提供卓越的耐用性。此套件包含多个螺栓，可全面提升车辆的功能性和外观。

主要特点：

优质TC4钛合金：强度高、重量轻、耐腐蚀好，是高性能青铜的理想之选。
CNC精密加工：每个零件均采用CNC精密加工，以确保完美贴合和最大耐用性。
颈部加固：钛合金螺栓在不影响强度的前提下减弱了重量，提高了性能和操纵性。
定制颜色选项：提供金色、蓝色、钛色、黑色、绿色、紫色和糖果色，打造完全个性化的外观。
全面升级套件：包含适用于BMW R 1250GS ADV的多个组件的螺栓，例如侧支架、脚踏板、制动部件等。

颜色选项：

金子
蓝色的
钛
黑色的
绿色的
转变的
糖果

工具兼容性：
安装时需要星形/梅花扳手。

包含组件：
适用于各种BMW R 1250GS ADV零件的钛螺栓，包括排气吊架、车把、脚踏、制动卡钳和发动机盖（具体零件和数量因套件而异）。

性能：
SPARTS钛合金螺栓在增强的同时，保持了高性能轿厢所需的强度。其优异的耐腐蚀确保了即使在极端条件下也能持久保持重量功能性和美观性。

安装注意事项：
本套件专为宝马 R 1250GS ADV 设计。请咨询客服以确认是否与您的型号年份和配置兼容。

定制服务：
如需定制颜色选项或特定组件要求，请在订单中留言或联系客服。

使用SPARTS钛合金螺栓套件升级您的BMW R 1250GS ADV，可提升性能、耐用性和高性能的个性化外观。

这是一套用于摩托车改装的高级钛合金螺栓套装，并非原厂摩托车品牌提供的原厂配件。

Warning

Compatibility Check: Due to the complexity of original equipment manufacturer (OEM) parts' models and batches, there may be instances where this product is incompatible.

Upon receiving this product, please compare it with the OEM specifications to ensure compatibility before installation.

Torque Specifications: Install this product strictly according to the torque values specified in the OEM parts manual.Installation Issues: If you encounter any discrepancies with the OEM specifications or face difficulties at the initial stage of installation, stop immediately and contact customer service for assistance with returns or exchanges.

No Forced Installation: Do not force installation under any circumstances.Liability: Any damages resulting from forced installation or unauthorized modifications of this product (or its components) will be the sole responsibility of the buyer.

About Color Variations

All products are photographed to accurately represent the colors you will see upon receipt.

Due to differences in lighting, angles, or screen settings, slight color variations may occur.

The actual product should be considered the standard.For "colored" and "blue" products, the coloring process may result in uneven color distribution, making each product unique.

Details

This product is crafted with quality materials to ensure durability and performance. Designed with your convenience in mind, it seamlessly fits into your everyday life.

Shipping & Returns

We strive to process and ship all orders in a timely manner, working diligently to ensure that your items are on their way to you as soon as possible.

We are committed to ensuring a positive shopping experience for all our customers. If for any reason you wish to return an item, we invite you to reach out to our team for assistance, and we will evaluate every return request with care and consideration.

Shop The Full Collection

BREMBO M50 Titanium Bolt Kit – Motorcycle Brake Caliper Upgrade